AboutServicesProjectsSafetyCareersContactGet a QuoteCall (000) 000-0000
Services banner photo
Home/Services

Insulation for every system in your plant

Hot, cold, and everything in between. Our crews insulate, jacket, and seal process piping, refrigeration, steam, tanks, and equipment, with one safety program and one team accountable for the result.

General Contracting photo
01 · Service

Hot Process Piping

Insulation for hot water, process, thermal oil, and high-temperature lines that saves energy and protects your people.

Bare hot pipe wastes fuel and burns hands. We insulate process lines, hot water loops, and high-temperature systems with the right material and thickness for the operating temperature, then finish them with a durable jacket so they look clean and hold up to wash-down.

  • Fiberglass, mineral wool & calcium silicate
  • Personnel protection on hot surfaces
  • Valves, flanges & fittings insulated to match
  • Thermal oil & high-temperature systems
  • Shutdown, turnaround & new-construction installs
  • Aluminum, stainless & PVC jacketing
Hot water
Process lines
Thermal oil
Hot oil
Cookers
Fryers
Dryers
Heat exchangers
Good to know: We can also insulate hot equipment like cookers, dryers, and heat exchangers, not just the pipe.
02 · Service

Steam & Condensate

Steam lines lose money every foot they run bare. We insulate steam mains, branches, condensate returns, traps, and valves so your boiler works less and your plant stays safe, and we use removable covers where your team needs access for maintenance.

Steam Mains
Condensate Returns
Valves & Strainers
Traps & Stations
Boiler Rooms
Deaerators
Headers
Pipe Racks
PRVs & Regulators
Removable & Reusable Covers
Structural Steel photo
Insulated Metal Panels photo
03 · Service

Cold Systems & Refrigeration

Insulation for ammonia refrigeration, glycol, chilled water, and low-temperature process lines, with sealed vapor barriers that stop condensation and ice.

On cold lines, the vapor barrier is everything. One open seam lets moisture in, and that turns into dripping pipe, ice balls, and corrosion under insulation. We install closed-cell insulation, seal every joint and fitting, and finish with jacketing that holds up to wash-down in food plants.

  • Ammonia refrigeration piping and vessels
  • Glycol & chilled water systems
  • Cellular glass, PIR & elastomeric foam
  • Vapor barriers & sealed joints
  • Ice ball removal & re-insulation
  • Engine room, rack & evaporator lines
Ammonia
Glycol
Chilled water
Freezers
Blast cells
Engine rooms
Pipe racks
Good to know: Wet or iced-over insulation can often be replaced during sanitation shifts or planned downtime.
04 · Service

Tanks & Vessels

Insulation and jacketing for tanks, vessels, heat exchangers, pumps, and other equipment, hot or cold.

Big surfaces lose the most energy. We insulate and jacket storage tanks, process vessels, receivers, and heat exchangers, and build removable covers for pumps and valves your maintenance team opens often.

  • Storage & process tank insulation
  • Ammonia vessels & receivers
  • Heat exchangers, pumps, and skids
  • Banded & fully jacketed tank finishes
  • Heads, nozzles & manways insulated to match
  • Outdoor weatherproof systems
Tanks
Vessels
Receivers
Exchangers
Pumps
Skids
Hoppers & bins
Ductwork
Good to know: Outdoor tanks get a weather-tight jacket and sealed seams so rain stays out and the insulation stays dry.
Millwright Services photo
Mechanical & Process Piping photo
05 · Service

Metal & PVC Jacketing

Aluminum, stainless steel, and PVC jacketing that protects insulation and looks clean for years.

Insulation only works if it stays dry and in one piece. We cut, roll, and install jacketing and fitting covers to suit your environment: stainless for wash-down and corrosive areas, aluminum for general plant and outdoor runs, and PVC for food and clean areas.

  • Aluminum & stainless steel jacketing
  • PVC jacketing and fitting covers
  • Formed elbows, tees, and end caps
  • Bands, straps, and screws done right
  • Sealed seams & weatherproof laps
  • Color-coded & labeled finishes
Food plants
Wash-down
Outdoor
Corrosive areas
Clean rooms
Pipe racks
Equipment
Good to know: We can add pipe markers and flow arrows when we jacket, so your lines are labeled when we leave.
06 · Service

Repairs & Removable Blankets

Insulation surveys, repairs, and custom removable blankets for valves, flanges, and equipment.

We walk your plant to find missing, wet, or damaged insulation and give you a clear list of repairs ranked by what costs you the most. Then we fix it, and build custom removable blankets for valves, strainers, and flanges so maintenance can get in without tearing out insulation.

  • Walk-downs & insulation surveys, with photos
  • Wet & damaged insulation replacement
  • Custom removable insulation blankets
  • Ice ball and condensation fixes
  • Jacketing repair and re-sealing
  • Maintenance and service agreements
Surveys
Blankets
Valve covers
Re-jacketing
Ice removal
Patching
Service plans
Engineering & Drafting photo

Materials we install

We match the insulation to the temperature, the environment, and your budget.

Fiberglass

A go-to for hot water and general process piping. Light, efficient, and easy to work with.

Mineral Wool

Handles higher temperatures and resists fire, good for steam and hot process lines.

Calcium Silicate

Rigid and tough for high-temperature lines where insulation may get stepped on or bumped.

Cellular Glass

Closed-cell and moisture-proof, a strong choice for ammonia and below-ambient lines.

Polyisocyanurate (PIR)

High insulating value in a thin profile for refrigeration and chilled water.

Elastomeric Foam

Flexible closed-cell insulation for chilled water, glycol, and HVAC lines.

Removable Blankets

Custom-sewn covers for valves, flanges, and equipment that need regular access.

Vapor Barriers

Mastics, tapes, and wraps that seal cold lines so moisture never gets in.

Aluminum, Stainless & PVC Jacketing

Protective outer jacketing chosen for wash-down, outdoor, or corrosive environments.

Accessories & finishes

The details that make insulation last.

Fitting & Elbow Covers
Valve Covers
Flange & Union Covers
Pipe Saddles
Insulated Supports
Eyelet Tags
Bands & Straps
Mastics
Sealants
Vapor Retarder Tape
Pipe Markers
Flow Arrows
Weatherproof & Sealed Laps
Tank Head & Nozzle Covers
Pump & Equipment Boxes
Expansion Joint Covers
Aerogel Wrap
Stainless Banding
Custom fabricated equipment in the shop
Survey · Spec · Insulate · Jacket

When your system needs it, we insulate it.

Process Piping
Steam Lines
Condensate
Ammonia & Glycol
Chilled & Hot Water
Tanks
Vessels
Heat Exchangers
Valves & Flanges
Removable Blankets
Insulation Surveys
Pipe Racks
Equipment
Aluminum & Stainless Jacketing
PVC & Fitting Covers
Vapor & Ice Repairs
Pipe Markers & Labeling
Ductwork & HVAC
Shutdowns & Turnarounds
Personnel Protection

Planning a shutdown, expansion, or insulation upgrade?

Tell us about your system. We’ll walk the site, price it straight, and insulate it to your facility’s safety and quality standards.